{
    "type": "machine",
    "name": "Artillery M1 Pro 0.2 nozzle",
    "from": "system",
    "instantiation": "true",
    "adaptive_bed_mesh_margin": "0",
    "auxiliary_fan": "1",
    "bbl_use_printhost": "0",
    "bed_custom_model": "",
    "bed_custom_texture": "",
    "bed_exclude_area": [
        "0x0"
    ],
    "bed_mesh_max": "99999,99999",
    "bed_mesh_min": "-99999,-99999",
    "bed_mesh_probe_distance": "50,50",
    "before_layer_change_gcode": "\n",
    "best_object_pos": "0.5,0.5",
    "change_extrusion_role_gcode": "",
    "change_filament_gcode": "",
    "cooling_tube_length": "5",
    "cooling_tube_retraction": "91.5",
    "default_filament_profile": [
        "Artillery PLA Basic"
    ],
    "default_print_profile": "0.20mm Standard @Artillery Genius",
    "deretraction_speed": [
        "30"
    ],
    "disable_m73": "0",
    "emit_machine_limits_to_gcode": "0",
    "enable_filament_ramming": "1",
    "enable_long_retraction_when_cut": "0",
    "extra_loading_move": "-2",
    "extruder_clearance_height_to_lid": "140",
    "extruder_clearance_height_to_rod": "36",
    "extruder_clearance_radius": "65",
    "extruder_colour": [
        "#018001"
    ],
    "extruder_offset": [
        "0x0"
    ],
    "fan_kickstart": "0",
    "fan_speedup_overhangs": "1",
    "fan_speedup_time": "0",
    "gcode_flavor": "klipper",
    "head_wrap_detect_zone": [],
    "high_current_on_filament_swap": "0",
    "layer_change_gcode": "G92 E0\n{if layer_num==2}\n\n;filter_fan\nM106 P3 S{during_print_exhaust_fan_speed[0]*255/100.0};\n\n;auxiliary_fan\nM106 P2 S{additional_cooling_fan_speed[0]*255/100.0}\n\n{endif}\n\n\n",
    "long_retractions_when_cut": [
        "0"
    ],
    "machine_end_gcode": ";===== G-CODE START =====================\n;===== machine: M1 PRO =========================\n;===== date: 20250513 =====================\n\n;===== Raise Z-Axis =====================\nM400 ; wait for buffer to clear\nG90\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\n\n{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F300 ; Move print head up{endif}\nG1 X260 Y250 F3600 ; move to safe pos \n{if max_layer_z < 50}G1 Z50 F300 ; Move print head further up{endif}\n;===== Default Settings =====================\nM400\nM106 S0  ;turn off cool fan\nM141 S0  ;turn off PTC\nM106 P2 S0  ;turn off chamber fan\nM106 P1 S0  ;turn off PTC fan\nM106 P3 S0  ;turn off filter fan\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nSET_VELOCITY_LIMIT VELOCITY=500;\nSET_VELOCITY_LIMIT ACCEL=6000;\nSET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0.2;\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=5;\nG21; set units to millimeters\nM104 S0\nM140 S0\nM400\nM84 X Y Z E ; disable motors\nM400\n;===== G-CODE END =====================\n",
    "machine_load_filament_time": "0",
    "machine_max_acceleration_e": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "20000",
        "1250"
    ],
    "machine_max_acceleration_retracting": [
        "5000",
        "1250"
    ],
    "machine_max_acceleration_travel": [
        "1000",
        "1250"
    ],
    "machine_max_acceleration_x": [
        "20000",
        "1000"
    ],
    "machine_max_acceleration_y": [
        "20000",
        "1000"
    ],
    "machine_max_acceleration_z": [
        "500",
        "200"
    ],
    "machine_max_jerk_e": [
        "2.5",
        "2.5"
    ],
    "machine_max_jerk_x": [
        "9",
        "10"
    ],
    "machine_max_jerk_y": [
        "9",
        "10"
    ],
    "machine_max_jerk_z": [
        "3",
        "0.4"
    ],
    "machine_max_speed_e": [
        "30",
        "120"
    ],
    "machine_max_speed_x": [
        "500",
        "200"
    ],
    "machine_max_speed_y": [
        "500",
        "200"
    ],
    "machine_max_speed_z": [
        "20",
        "12"
    ],
    "machine_min_extruding_rate": [
        "0",
        "0"
    ],
    "machine_min_travel_rate": [
        "0",
        "0"
    ],
    "machine_pause_gcode": "M600",
    "machine_start_gcode": ";===== START G-CODE  =====================\n;===== machine: M1 PRO =========================\n;===== size: X260 Y260 Z260 =====================\n;===== date: 20250529 =====================\n\n;===== Default Settings =====================\nM106 S0  ;turn off cool fan\nM141 S0  ;turn off PTC\nM106 P2 S0  ;turn off chamber fan\nM106 P1 S0  ;turn off PTC fan\nM106 P3 S0  ;turn off filter fan\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nSET_VELOCITY_LIMIT VELOCITY=500;\nSET_VELOCITY_LIMIT ACCEL=6000;\nSET_VELOCITY_LIMIT MINIMUM_CRUISE_RATIO=0.2;\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=5;\nG21; set units to millimeters\nG90\n\n;===== Preheat While Zeroing =====================\nM106 P1 S255\n\nM140 S[bed_temperature_initial_layer_single];\n\n{if filament_type[initial_no_support_extruder]==\"ABS\"}\nM106 P2 S60\nG4 P1000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PC\"}\nM106 P2 S60\nG4 P1000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"ASA\"}\nM106 P2 S60\nG4 P1000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\n{if filament_type[initial_no_support_extruder]==\"PA\"}\nM106 P2 S60\nG4 P1000\nM191 S47;\nM141 S{chamber_temperature[0]};\n{endif}\n\nM106 P2 S0\nM106 S0;\nG4 P500\n\n;===== Wait heating =====================\nG28\nG1 X20 Y5.8 Z0.2 F18000\n\n;===== Set Print Temperature =====================\nM106 S120;\nG4 P500\nM104 S[first_layer_temperature];\n\n{if (bed_temperature_initial_layer_single >0)}\nM190 S[bed_temperature_initial_layer_single];\n{else}\nM140 S[bed_temperature_initial_layer_single];\n{endif}\n\nM109 S[first_layer_temperature];\nM106 S0;\nG4 P500\n\n;===== Wipe Nozzle Extrude Line =====================\nG1 X5 Y-0.5 Z10 F18000\nM400\nG1 X5 Y-0.5 Z0.3 F600\nM400\n\nG92 E0\nG1 X180 Y-0.5 Z0.3 F1800.0 E18.0;draw line\n\nG92 E0\nG1 X180 Y1.5 Z0.3 F1800.0 E0.2;draw line\n\nG92 E0\nG1 X80 Y1.5 Z0.3 F1800.0 E10.0;draw line\n\nG92 E0\nG1 X80 Y-2 Z0.3 F1800.0 E0.4;draw line\n\nG92 E0\nG1 X160 Y-2 Z0.3 F1800.0 E8;draw line\n\nG92 E0\nG1 X160 Y0 Z0.3 F1800.0 E0.2;draw line\n\nG92 E0\nM400\n\n;===== END G-CODE  =====================\n\n\n\n\n",
    "machine_tool_change_time": "0",
    "machine_unload_filament_time": "0",
    "manual_filament_change": "0",
    "max_layer_height": [
        "0.14"
    ],
    "min_layer_height": [
        "0.04"
    ],
    "nozzle_diameter": [
        "0.2"
    ],
    "nozzle_height": "2.5",
    "nozzle_hrc": "0",
    "nozzle_type": "hardened_steel",
    "nozzle_volume": "0",
    "parking_pos_retraction": "92",
    "pellet_modded_printer": "0",
    "preferred_orientation": "0",
    "print_host": "192.168.3.24",
    "print_host_webui": "",
    "printable_area": [
        "181.7x-9.99164",
        "182.065x-9.96658",
        "182.429x-9.92488",
        "182.79x-9.86661",
        "183.148x-9.7919",
        "183.502x-9.70091",
        "183.851x-9.59383",
        "184.196x-9.47087",
        "184.534x-9.33231",
        "184.866x-9.17842",
        "185.19x-9.00954",
        "185.507x-8.82599",
        "185.814x-8.62819",
        "186.113x-8.41653",
        "186.401x-8.19148",
        "186.679x-7.95348",
        "186.945x-7.70303",
        "187.2x-7.44069",
        "187.442x-7.16695",
        "187.672x-6.88243",
        "187.889x-6.58769",
        "188.635x-5.52152",
        "189.769x-3.90205",
        "190.709x-2.55922",
        "190.924x-2.27065",
        "191.156x-1.9955",
        "191.404x-1.73476",
        "191.667x-1.48938",
        "191.945x-1.26022",
        "192.236x-1.04814",
        "192.539x-0.853866",
        "192.853x-0.678131",
        "193.177x-0.521545",
        "193.51x-0.384674",
        "193.851x-0.26802",
        "194.198x-0.171997",
        "194.55x-0.096954",
        "194.906x-0.043151",
        "195.264x-0.010803",
        "195.624x0",
        "261x0",
        "261.369x0.017059",
        "261.735x0.068099",
        "262.095x0.152694",
        "262.445x0.270111",
        "262.783x0.419342",
        "263.106x0.599136",
        "263.411x0.807937",
        "263.695x1.04396",
        "263.956x1.30522",
        "264.192x1.58946",
        "264.401x1.89427",
        "264.581x2.21704",
        "264.73x2.55504",
        "264.847x2.90535",
        "264.932x3.265",
        "264.983x3.63092",
        "265x4",
        "265x261",
        "264.983x261.369",
        "264.932x261.735",
        "264.847x262.095",
        "264.73x262.445",
        "264.581x262.783",
        "264.401x263.106",
        "264.192x263.411",
        "263.956x263.695",
        "263.695x263.956",
        "263.411x264.192",
        "263.106x264.401",
        "262.783x264.581",
        "262.445x264.73",
        "262.095x264.847",
        "261.735x264.932",
        "261.369x264.983",
        "261x265",
        "228x265",
        "227.741x265.034",
        "227.5x265.134",
        "227.293x265.293",
        "227.134x265.5",
        "227.034x265.741",
        "227x266",
        "227x270",
        "226.978x270.362",
        "226.913x270.718",
        "226.805x271.064",
        "226.656x271.394",
        "226.469x271.704",
        "226.246x271.989",
        "225.989x272.246",
        "225.704x272.469",
        "225.394x272.656",
        "225.064x272.805",
        "224.718x272.913",
        "224.362x272.978",
        "224x273",
        "193x273",
        "192.638x272.978",
        "192.282x272.913",
        "191.936x272.805",
        "191.606x272.656",
        "191.296x272.469",
        "191.011x272.246",
        "190.754x271.989",
        "190.531x271.704",
        "190.344x271.394",
        "190.195x271.064",
        "190.087x270.718",
        "190.022x270.362",
        "190x270",
        "190x266",
        "189.966x265.741",
        "189.866x265.5",
        "189.707x265.293",
        "189.5x265.134",
        "189.259x265.034",
        "189x265",
        "76x265",
        "75.7412x265.034",
        "75.5x265.134",
        "75.2929x265.293",
        "75.134x265.5",
        "75.0341x265.741",
        "75x266",
        "75x270",
        "74.9781x270.362",
        "74.9128x270.718",
        "74.805x271.064",
        "74.6563x271.394",
        "74.4689x271.704",
        "74.2455x271.989",
        "73.9894x272.246",
        "73.7042x272.469",
        "73.3942x272.656",
        "73.0638x272.805",
        "72.7179x272.913",
        "72.3616x272.978",
        "72x273",
        "41x273",
        "40.6384x272.978",
        "40.282x272.913",
        "39.9362x272.805",
        "39.6058x272.656",
        "39.2958x272.469",
        "39.0106x272.246",
        "38.7545x271.989",
        "38.531x271.704",
        "38.3436x271.394",
        "38.1949x271.064",
        "38.0872x270.718",
        "38.0219x270.362",
        "38x270",
        "38x266",
        "37.9659x265.741",
        "37.866x265.5",
        "37.7071x265.293",
        "37.5x265.134",
        "37.2588x265.034",
        "37x265",
        "4x265",
        "3.63092x264.983",
        "3.26498x264.932",
        "2.90533x264.847",
        "2.55502x264.73",
        "2.21704x264.581",
        "1.89426x264.401",
        "1.58945x264.192",
        "1.30521x263.956",
        "1.04394x263.695",
        "0.807922x263.411",
        "0.599121x263.106",
        "0.419342x262.783",
        "0.270111x262.445",
        "0.152679x262.095",
        "0.068084x261.735",
        "0.017059x261.369",
        "0x261",
        "0x4",
        "0.017059x3.63092",
        "0.068084x3.265",
        "0.152679x2.90535",
        "0.270111x2.55504",
        "0.419342x2.21704",
        "0.599121x1.89427",
        "0.807922x1.58946",
        "1.04394x1.30522",
        "1.30521x1.04396",
        "1.58945x0.807937",
        "1.89426x0.599136",
        "2.21704x0.419342",
        "2.55502x0.270111",
        "2.90533x0.152694",
        "3.26498x0.068099",
        "3.63092x0.017059",
        "4x0",
        "69.3761x0",
        "69.7359x-0.010803",
        "70.0944x-0.043151",
        "70.4503x-0.096954",
        "70.8024x-0.171997",
        "71.1493x-0.26802",
        "71.4898x-0.384674",
        "71.8228x-0.521545",
        "72.1469x-0.678131",
        "72.4611x-0.853866",
        "72.7641x-1.04814",
        "73.055x-1.26022",
        "73.3326x-1.48938",
        "73.596x-1.73476",
        "73.8441x-1.9955",
        "74.0763x-2.27065",
        "74.2914x-2.55922",
        "75.2314x-3.90205",
        "76.1714x-5.24487",
        "76.7589x-6.08414",
        "77.1114x-6.58769",
        "77.3279x-6.88243",
        "77.5576x-7.16695",
        "77.8002x-7.44069",
        "78.0549x-7.70303",
        "78.3214x-7.95348",
        "78.5991x-8.19148",
        "78.8874x-8.41653",
        "79.1856x-8.62819",
        "79.4932x-8.82599",
        "79.8095x-9.00954",
        "80.1339x-9.17842",
        "80.4657x-9.33231",
        "80.8041x-9.47087",
        "81.1485x-9.59383",
        "81.4982x-9.70091",
        "81.8524x-9.7919",
        "82.2104x-9.86661",
        "82.5714x-9.92488",
        "82.9348x-9.96658",
        "83.2996x-9.99164",
        "83.6652x-10",
        "181.335x-10"
    ],
    "printable_height": "260",
    "printer_model": "Artillery M1 Pro",
    "printer_notes": "",
    "printer_settings_id": "Artillery M1 Pro 0.2 nozzle",
    "printer_structure": "undefine",
    "printer_technology": "FFF",
    "printer_variant": "0.2",
    "printhost_apikey": "",
    "printhost_authorization_type": "key",
    "printhost_cafile": "",
    "printhost_password": "",
    "printhost_port": "",
    "printhost_ssl_ignore_revoke": "0",
    "printhost_user": "",
    "printing_by_object_gcode": "",
    "purge_in_prime_tower": "1",
    "retract_before_wipe": [
        "0%"
    ],
    "retract_length_toolchange": [
        "10"
    ],
    "retract_lift_above": [
        "0"
    ],
    "retract_lift_below": [
        "0"
    ],
    "retract_lift_enforce": [
        "All Surfaces"
    ],
    "retract_restart_extra": [
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0"
    ],
    "retract_when_changing_layer": [
        "1"
    ],
    "retraction_distances_when_cut": [
        "18"
    ],
    "retraction_length": [
        "0.4"
    ],
    "retraction_minimum_travel": [
        "1"
    ],
    "retraction_speed": [
        "30"
    ],
    "scan_first_layer": "0",
    "silent_mode": "0",
    "single_extruder_multi_material": "1",
    "support_air_filtration": "1",
    "support_chamber_temp_control": "1",
    "support_multi_bed_types": "0",
    "template_custom_gcode": "",
    "thumbnails": "300x300/PNG",
    "thumbnails_format": "PNG",
    "time_cost": "0",
    "time_lapse_gcode": "",
    "travel_slope": [
        "3"
    ],
    "upward_compatible_machine": [],
    "use_firmware_retraction": "0",
    "use_relative_e_distances": "1",
    "wipe": [
        "0"
    ],
    "wipe_distance": [
        "1"
    ],
    "z_hop": [
        "0.4"
    ],
    "z_hop_types": [
        "Auto Lift"
    ],
    "z_offset": "0"
}