{
    "type": "process",
    "name": "0.10mm High Quality @BBL A1 0.2 nozzle",
    "inherits": "fdm_process_single_0.10_nozzle_0.2",
    "from": "system",
    "setting_id": "GP114",
    "instantiation": "true",
    "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
    "default_acceleration": [
        "4000"
    ],
    "elefant_foot_compensation": "0.075",
    "initial_layer_infill_speed": [
        "28"
    ],
    "initial_layer_speed": [
        "16"
    ],
    "outer_wall_acceleration": [
        "2000"
    ],
    "outer_wall_speed": [
        "60"
    ],
    "sparse_infill_pattern": "gyroid",
    "travel_speed": [
        "700"
    ],
    "compatible_printers": [
        "Bambu Lab A1 0.2 nozzle"
    ]
}