{
    "type": "machine",
    "name": "Co Print ChromaSet 0.4 nozzle - Ender-3 V3",
    "inherits": "fdm_machine_common",
    "from": "system",
    "setting_id": "GM001",
    "instantiation": "true",
    "printer_model": "Co Print ChromaSet",
    "default_print_profile": "0.2mm Standard @Co Print ChromaSet 0.4",
    "printer_variant": "0.4",
    "nozzle_diameter": [
        "0.4"
    ],
    "nozzle_volume": [
        "156"
    ],
    "retract_before_wipe": [
        "0%"
    ],
    "printable_area": [
        "0x0",
        "180x0",
        "180x173",
        "0x173"
    ],
    "printable_height": "250",
    "gcode_flavor": "klipper",
    "retraction_length": [
        "0.5"
    ],
    "machine_max_speed_e": [
        "100"
    ],
    "machine_max_speed_x": [
        "500"
    ],
    "machine_max_speed_y": [
        "500"
    ],
    "machine_max_speed_z": [
        "10"
    ],
    "machine_max_acceleration_e": [
        "2500"
    ],
    "machine_max_acceleration_extruding": [
        "5000"
    ],
    "machine_max_acceleration_retracting": [
        "2500"
    ],
    "machine_max_acceleration_travel": [
        "40000"
    ],
    "machine_max_acceleration_x": [
        "5000"
    ],
    "machine_max_acceleration_y": [
        "5000"
    ],
    "machine_max_acceleration_z": [
        "100"
    ],
    "machine_max_jerk_e": [
        "2.5"
    ],
    "machine_max_jerk_x": [
        "8"
    ],
    "machine_max_jerk_y": [
        "8"
    ],
    "machine_max_jerk_z": [
        "0.2"
    ],
    "z_hop": [
        "0.2"
    ],
    "retraction_speed": [
        "60"
    ],
    "deretraction_speed": [
        "30"
    ],
    "retraction_minimum_travel": [
        "1"
    ],
    "retract_length_toolchange": [
        "2"
    ],
    "wipe": [
        "1"
    ],
    "wipe_distance": [
        "2"
    ],
    "thumbnails": [
        "300x300",
        "400x300",
        "96x96",
        "32x32"
    ],
    "retract_lift_below": [
        "343"
    ],
    "thumbnails_format": "PNG",
    "machine_start_gcode": "start_print  EXTRUDER=[initial_extruder] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
    "machine_end_gcode": "end_print",
    "change_filament_gcode": "FILAMENT_CHANGE LAYER_NUM=[layer_num] NEXT_EXTRUDER=[next_extruder]",
    "default_filament_profile": [
        "CoPrint Generic PLA"
    ],
    "extruder_clearance_radius": [
        "65"
    ],
    "extruder_clearance_height_to_rod": [
        "36"
    ],
    "extruder_clearance_height_to_lid": [
        "140"
    ],
    "min_layer_height": [
        "0.08"
    ],
    "max_layer_height": [
        "0.32"
    ],
    "retract_restart_extra": [
        "0"
    ],
    "cooling_tube_retraction": [
        "0"
    ],
    "cooling_tube_length": [
        "0"
    ],
    "parking_pos_retraction": [
        "0"
    ],
    "retract_when_changing_layer": [
        "0"
    ],
    "extra_loading_move": [
        "0"
    ],
    "high_current_on_filament_swap": [
        "0"
    ],
    "enable_filament_ramming": [
        "0"
    ],
    "z_hop_types": "Spiral Lift"
}