{
    "type": "machine",
    "name": "fdm_machine_ecc",
    "inherits": "fdm_machine_ecc_common",
    "from": "system",
    "instantiation": "false",
    "nozzle_diameter": [
        "0.4"
    ],
    "printer_variant": "0.4",
    "printable_area": [
        "0x0",
        "256x0",
        "256x256",
        "0x256"
    ],
    "auxiliary_fan": "1",
    "bed_exclude_area": [
        "0x0"
    ],
    "default_filament_profile": [
        "Elegoo PLA"
    ],
    "default_print_profile": "0.20mm Standard @Elegoo CC 0.4 nozzle",
    "extruder_colour": [
        "#018001"
    ],
    "machine_max_acceleration_e": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_retracting": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_travel": [
        "9000",
        "9000"
    ],
    "machine_max_acceleration_x": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_y": [
        "20000",
        "20000"
    ],
    "machine_max_acceleration_z": [
        "500",
        "200"
    ],
    "machine_max_speed_e": [
        "30",
        "30"
    ],
    "machine_max_speed_x": [
        "500",
        "200"
    ],
    "machine_max_speed_y": [
        "500",
        "200"
    ],
    "machine_max_speed_z": [
        "20",
        "20"
    ],
    "machine_max_jerk_e": [
        "2.5",
        "2.5"
    ],
    "machine_max_jerk_x": [
        "9",
        "9"
    ],
    "machine_max_jerk_y": [
        "9",
        "9"
    ],
    "machine_max_jerk_z": [
        "3",
        "3"
    ],
    "machine_min_extruding_rate": [
        "0",
        "0"
    ],
    "machine_min_travel_rate": [
        "0",
        "0"
    ],
    "retract_lift_below": [
        "249"
    ],
    "extruder_clearance_max_radius": "68",
    "extruder_clearance_height_to_lid": "90",
    "nozzle_volume": "107",
    "printer_structure": "corexy",
    "best_object_pos": "0.5x0.5",
    "retraction_minimum_travel": [
        "0.8"
    ],
    "retract_before_wipe": [
        "0%"
    ],
    "wipe_distance": [
        "1.2"
    ],
    "retraction_length": [
        "0.8"
    ],
    "retract_length_toolchange": [
        "2"
    ],
    "z_hop": [
        "0.4"
    ],
    "retraction_speed": [
        "30"
    ],
    "deretraction_speed": [
        "30"
    ],
    "z_hop_types": [
        "Auto Lift"
    ],
    "thumbnails": [
        "320x320",
        "160x160"
    ],
    "thumbnails_format": "PNG",
    "nozzle_type": "brass",
    "single_extruder_multi_material": "1",
    "machine_end_gcode": ";===== date: 20240510 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y245 F3000\n\nG1 X65 Y245 F12000\nG1 Y245 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n",
    "layer_change_gcode": ";LAYER:{layer_num+1}\n",
    "change_filament_gcode": "",
    "machine_pause_gcode": "M600"
}