{
    "type": "machine",
    "name": "FLSun T1 0.4 nozzle",
    "inherits": "fdm_machine_common",
    "from": "system",
    "setting_id": "GM003",
    "instantiation": "true",
    "printer_model": "FLSun T1",
    "default_print_profile": "0.20mm Standard @FLSun T1",
    "gcode_flavor": "klipper",
    "printer_structure": "delta",
    "nozzle_diameter": [
        "0.4"
    ],
    "bed_exclude_area": [
        "0x0"
    ],
    "thumbnails": [
        "48x48/PNG, 300x300/PNG"
    ],
    "deretraction_speed": [
        "70"
    ],
    "max_layer_height": [
        "0.3"
    ],
    "retract_before_wipe": [
        "30%"
    ],
    "retract_length_toolchange": [
        "1"
    ],
    "retract_restart_extra": [
        "-0.05"
    ],
    "retract_restart_extra_toolchange": [
        "-0.05"
    ],
    "retraction_length": [
        "1"
    ],
    "retraction_minimum_travel": [
        "2"
    ],
    "retraction_speed": [
        "70"
    ],
    "machine_max_acceleration_e": [
        "30000"
    ],
    "machine_max_acceleration_extruding": [
        "30000"
    ],
    "machine_max_acceleration_retracting": [
        "30000"
    ],
    "machine_max_acceleration_x": [
        "30000"
    ],
    "machine_max_acceleration_y": [
        "30000"
    ],
    "machine_max_acceleration_z": [
        "30000"
    ],
    "machine_max_jerk_e": [
        "100"
    ],
    "machine_max_jerk_x": [
        "20000"
    ],
    "machine_max_jerk_y": [
        "20000"
    ],
    "machine_max_jerk_z": [
        "10000"
    ],
    "machine_max_speed_e": [
        "1000"
    ],
    "machine_max_speed_x": [
        "1000"
    ],
    "machine_max_speed_y": [
        "1000"
    ],
    "machine_max_speed_z": [
        "1000"
    ],
    "printable_area": [
        "129.505x11.3302",
        "128.025x22.5743",
        "125.57x33.6465",
        "122.16x44.4626",
        "117.82x54.9404",
        "112.583x65",
        "106.49x74.5649",
        "99.5858x83.5624",
        "91.9239x91.9239",
        "83.5624x99.5858",
        "74.5649x106.49",
        "65x112.583",
        "54.9404x117.82",
        "44.4626x122.16",
        "33.6465x125.57",
        "22.5743x128.025",
        "11.3302x129.505",
        "7.9602e-15x130",
        "-11.3302x129.505",
        "-22.5743x128.025",
        "-33.6465x125.57",
        "-44.4626x122.16",
        "-54.9404x117.82",
        "-65x112.583",
        "-74.5649x106.49",
        "-83.5624x99.5858",
        "-91.9239x91.9239",
        "-99.5858x83.5624",
        "-106.49x74.5649",
        "-112.583x65",
        "-117.82x54.9404",
        "-122.16x44.4626",
        "-125.57x33.6465",
        "-128.025x22.5743",
        "-129.505x11.3302",
        "-130x1.59204e-14",
        "-129.505x-11.3302",
        "-128.025x-22.5743",
        "-125.57x-33.6465",
        "-122.16x-44.4626",
        "-117.82x-54.9404",
        "-112.583x-65",
        "-106.49x-74.5649",
        "-99.5858x-83.5624",
        "-91.9239x-91.9239",
        "-83.5624x-99.5858",
        "-74.5649x-106.49",
        "-65x-112.583",
        "-54.9404x-117.82",
        "-44.4626x-122.16",
        "-33.6465x-125.57",
        "-22.5743x-128.025",
        "-11.3302x-129.505",
        "-2.38806e-14x-130",
        "11.3302x-129.505",
        "22.5743x-128.025",
        "33.6465x-125.57",
        "44.4626x-122.16",
        "54.9404x-117.82",
        "65x-112.583",
        "74.5649x-106.49",
        "83.5624x-99.5858",
        "91.9239x-91.9239",
        "99.5858x-83.5624",
        "106.49x-74.5649",
        "112.583x-65",
        "117.82x-54.9404",
        "122.16x-44.4626",
        "125.57x-33.6465",
        "128.025x-22.5743",
        "129.505x-11.3302",
        "130x-3.18408e-14"
    ],
    "support_air_filtration": "1",
    "printable_height": "330",
    "machine_end_gcode": "M107 T0\nM104 S0\nM104 S0 T1\nM140 S0\nG92 E0\nG91\nG1 E-1 F2100\nG1 Z+0.5 F6000\nG28\nG90",
    "machine_start_gcode": "G21\nG90\nM82\nG28\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature] T0\nM109 S[first_layer_temperature] T0\nM190 S[first_layer_bed_temperature]\nG1 Z150 F3000\nG1 X-130 Y0 Z0.4\nM107 T0\nG92 E0\nG3 X0 Y-130 I130 J0 Z0.3 E30 F2000\nG1 Z2 F2000\nG92 E0\nSET_TMC_CURRENT STEPPER=extruder CURRENT=0.8",
    "change_filament_gcode": "PAUSE",
    "machine_pause_gcode": "PAUSE",
    "layer_change_gcode": "",
    "support_chamber_temp_control": "0",
    "scan_first_layer": "0",
    "nozzle_type": "hardened_steel",
    "adaptive_bed_mesh_margin": "0",
    "emit_machine_limits_to_gcode": "0",
    "auxiliary_fan": "0"
}