{
    "type": "machine",
    "name": "fdm_artemis_common",
    "inherits": "fdm_flashforge_common",
    "from": "system",
    "instantiation": "false",
    "gcode_flavor": "marlin",
    "printable_area": [
        "-95x-97.5",
        "95x-97.5",
        "95x97.5",
        "-95x97.5"
    ],
    "printable_height": "200",
    "machine_max_acceleration_e": [
        "500"
    ],
    "machine_max_acceleration_extruding": "500",
    "machine_max_acceleration_retracting": "500",
    "machine_max_acceleration_travel": "500",
    "machine_max_acceleration_x": "500",
    "machine_max_acceleration_y": "500",
    "machine_max_acceleration_z": "100",
    "machine_max_speed_e": "30",
    "machine_max_speed_x": "150",
    "machine_max_speed_y": "150",
    "machine_max_speed_z": "20",
    "machine_max_jerk_e": "2.5",
    "machine_max_jerk_x": "8",
    "machine_max_jerk_y": "8",
    "machine_max_jerk_z": "0.4",
    "printer_settings_id": "Flashforge",
    "retraction_minimum_travel": "1",
    "retract_before_wipe": [
        "100%"
    ],
    "retract_length_toolchange": "2",
    "deretraction_speed": "35",
    "retraction_speed": [
        "30"
    ],
    "z_hop": "0.2",
    "single_extruder_multi_material": "1",
    "change_filament_gcode": "M600",
    "machine_pause_gcode": "M25",
    "default_filament_profile": [
        "Flashforge PLA"
    ],
    "machine_start_gcode": "M118 X80.23 Y59.04 Z6.10 TO\nM140 S[bed_temperature_initial_layer] T0\nM104 S[nozzle_temperature_initial_layer] T0\nM107\nG90\nG28\nM132 X Y Z A B\nG1 Z50.000 F420\nG161 X Y F3300\nM7 T0\nM6 T0\nM651 S255\n",
    "machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F9000\nM104 S0 T0\nM140 S0 T0\nG162 Z F1800\nG28 X Y\nM132 X Y A B\nM652\nG91\nM18",
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
    "scan_first_layer": "0",
    "thumbnails": "80x60",
    "use_relative_e_distances": "0",
    "z_hop_types": "Auto Lift",
    "wipe_distance": "2",
    "extruder_clearance_radius": "42.3",
    "extruder_clearance_height_to_rod": "24.93",
    "extruder_clearance_height_to_lid": "200",
    "manual_filament_change": "1",
    "nozzle_type": "undefine",
    "auxiliary_fan": "1",
    "parking_pos_retraction": "0",
    "cooling_tube_length": "0",
    "cooling_tube_retraction": "0",
    "extra_loading_move": "0"
}