{
    "type": "process",
    "name": "0.14mm Standard @FF G4 0.25 nozzle",
    "inherits": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle",
    "from": "system",
    "instantiation": "true",
    "bridge_acceleration": "10%",
    "bridge_speed": "15",
    "elefant_foot_compensation": "0.1",
    "enable_prime_tower": "1",
    "filter_out_gap_fill": "0.1",
    "compatible_printers": [
        "Flashforge Guider4 0.25 nozzle"
    ],
    "gap_fill_target": "topbottom",
    "initial_layer_infill_speed": "80",
    "initial_layer_speed": "50",
    "layer_height": "0.14",
    "only_one_wall_top": "1",
    "print_settings_id": "0.14mm Standard @FF G4 0.25 nozzle",
    "resolution": "0.005",
    "seam_gap": "5%",
    "small_perimeter_speed": "10",
    "support_interface_spacing": "0.2",
    "support_type": "tree(auto)",
    "travel_acceleration": "30000",
    "wall_loops": "3"
}