{
    "type": "process",
    "name": "0.42mm Draft @Flashforge AD5M 0.6 Nozzle",
    "inherits": "0.30mm Standard @Flashforge AD5M 0.6 Nozzle",
    "from": "system",
    "instantiation": "true",
    "layer_height": "0.42",
    "compatible_printers": [
        "Flashforge Adventurer 5M 0.6 Nozzle"
    ],
    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "post_process": "",
    "infill_wall_overlap": "40%",
    "initial_layer_line_width": "0.7",
    "initial_layer_print_height": "0.45",
    "outer_wall_acceleration": "3000",
    "print_settings_id": "0.42mm Draft @Flashforge AD5M 0.6 Nozzle",
    "seam_gap": "6%",
    "support_bottom_interface_spacing": "0.4",
    "support_bottom_z_distance": "0.2",
    "support_interface_bottom_layers": "0",
    "support_interface_spacing": "0.4",
    "support_line_width": "0.6",
    "support_object_xy_distance": "0.4",
    "support_speed": "100",
    "support_top_z_distance": "0.22",
    "top_surface_line_width": "0.6",
    "skirt_loops": "0"
}