{
    "type": "process",
    "name": "0.56mm Draft @Flashforge AD5M 0.8 Nozzle",
    "inherits": "0.40mm Standard @Flashforge AD5M 0.8 Nozzle",
    "from": "system",
    "instantiation": "true",
    "layer_height": "0.56",
    "compatible_printers": [
        "Flashforge Adventurer 5M 0.8 Nozzle"
    ],
    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "post_process": "",
    "bottom_shell_layers": "2",
    "bridge_flow": "0.96",
    "gap_infill_speed": "100",
    "infill_wall_overlap": "40%",
    "initial_layer_acceleration": "400",
    "initial_layer_infill_speed": "50",
    "initial_layer_line_width": "0.85",
    "initial_layer_print_height": "0.45",
    "initial_layer_speed": "30",
    "initial_layer_travel_speed": "70%",
    "inner_wall_line_width": "0.82",
    "inner_wall_speed": "100",
    "internal_solid_infill_acceleration": "5000",
    "internal_solid_infill_line_width": "0.82",
    "line_width": "0.82",
    "outer_wall_line_width": "0.82",
    "outer_wall_speed": "100",
    "print_settings_id": "0.56mm Draft @Flashforge AD5M 0.8 Nozzle",
    "seam_gap": "5%",
    "sparse_infill_acceleration": "50%",
    "sparse_infill_line_width": "0.85",
    "support_bottom_interface_spacing": "0.4",
    "support_bottom_z_distance": "0.26",
    "support_interface_bottom_layers": "0",
    "support_interface_spacing": "0.4",
    "support_interface_speed": "30",
    "support_line_width": "0.8",
    "support_object_xy_distance": "0.45",
    "support_speed": "80",
    "support_top_z_distance": "0.26",
    "top_shell_layers": "3",
    "top_surface_acceleration": "1000",
    "top_surface_line_width": "0.82",
    "top_surface_speed": "100"
}