{
    "type": "machine",
    "name": "fdm_folgertech_common",
    "inherits": "fdm_machine_common",
    "from": "system",
    "instantiation": "false",
    "gcode_flavor": "marlin",
    "machine_max_acceleration_e": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "500",
        "500"
    ],
    "machine_max_acceleration_retracting": [
        "1000",
        "1000"
    ],
    "machine_max_acceleration_travel": [
        "500",
        "500"
    ],
    "machine_max_acceleration_x": [
        "3000",
        "3000"
    ],
    "machine_max_acceleration_y": [
        "3000",
        "3000"
    ],
    "machine_max_acceleration_z": [
        "100",
        "100"
    ],
    "machine_max_speed_e": [
        "60",
        "60"
    ],
    "machine_max_speed_x": [
        "500",
        "500"
    ],
    "machine_max_speed_y": [
        "500",
        "500"
    ],
    "machine_max_speed_z": [
        "10",
        "10"
    ],
    "machine_max_jerk_e": [
        "5",
        "5"
    ],
    "machine_max_jerk_x": [
        "8",
        "8"
    ],
    "machine_max_jerk_y": [
        "8",
        "8"
    ],
    "machine_max_jerk_z": [
        "0.4",
        "0.4"
    ],
    "machine_min_extruding_rate": [
        "0",
        "0"
    ],
    "machine_min_travel_rate": [
        "0",
        "0"
    ],
    "max_layer_height": [
        "0.32"
    ],
    "min_layer_height": [
        "0.08"
    ],
    "extruder_clearance_radius": "47",
    "extruder_clearance_height_to_rod": "34",
    "extruder_clearance_height_to_lid": "34",
    "printer_settings_id": "",
    "printer_technology": "FFF",
    "printer_variant": "0.4",
    "retraction_minimum_travel": [
        "2"
    ],
    "retract_before_wipe": [
        "70%"
    ],
    "retract_when_changing_layer": [
        "1"
    ],
    "retraction_length": [
        "5"
    ],
    "retract_length_toolchange": [
        "2"
    ],
    "z_hop": [
        "0.4"
    ],
    "retract_restart_extra": [
        "0"
    ],
    "retract_restart_extra_toolchange": [
        "0"
    ],
    "retraction_speed": [
        "60"
    ],
    "deretraction_speed": [
        "40"
    ],
    "silent_mode": "0",
    "single_extruder_multi_material": "1",
    "change_filament_gcode": "",
    "machine_pause_gcode": "M25 ;pause print",
    "wipe": [
        "1"
    ],
    "default_filament_profile": [
        "Generic PLA @System"
    ],
    "default_print_profile": "0.20mm Standard @FT 0.4 Nozzle",
    "bed_exclude_area": [
        "0x0"
    ],
    "machine_start_gcode": "G28 ; Home all axis\nG1 X0 Y5 Z0.2 F3000 ; Get ready to prime\nG92 E0 ; Reset extrusion distance\nG1 X250 E20 F600 ; Prime nozzle",
    "machine_end_gcode": "M140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nG28 X Y ; Home X and Y axis\nM84 X Y E ; disable motors",
    "layer_change_gcode": "",
    "scan_first_layer": "0",
    "nozzle_type": "undefine",
    "auxiliary_fan": "0"
}