{
    "type": "machine",
    "name": "Ginger_G1_common",
    "renamed_from": "ginger_one_common",
    "inherits": "fdm_machine_common",
    "from": "system",
    "instantiation": "false",
    "printer_settings_id": "Ginger_G1_common",
    "default_filament_profile": [
        "Ginger Generic PLA"
    ],
    "default_print_profile": "1.50mm Standard @Ginger G1",
    "deretraction_speed": [
        "200"
    ],
    "extruder_clearance_height_to_lid": "200",
    "extruder_clearance_height_to_rod": "100",
    "extruder_clearance_radius": "200",
    "machine_end_gcode": "END_PRINT",
    "machine_max_acceleration_e": [
        "1000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "2500",
        "20000"
    ],
    "machine_max_acceleration_retracting": [
        "2500",
        "5000"
    ],
    "machine_max_acceleration_x": [
        "2500",
        "20000"
    ],
    "machine_max_acceleration_y": [
        "2500",
        "20000"
    ],
    "machine_max_jerk_e": [
        "30",
        "2.5"
    ],
    "machine_max_jerk_x": [
        "7",
        "9"
    ],
    "machine_max_jerk_y": [
        "7",
        "9"
    ],
    "machine_max_jerk_z": [
        "7",
        "0.4"
    ],
    "machine_max_speed_e": [
        "500",
        "25"
    ],
    "machine_max_speed_x": [
        "300",
        "200"
    ],
    "machine_max_speed_y": [
        "300",
        "200"
    ],
    "machine_max_speed_z": [
        "12",
        "12"
    ],
    "machine_start_gcode": "START_PRINT BED_TEMPERATURE=[bed_temperature_initial_layer] KAMP_LEVELING=1 EXTRUDER_ROTATION_VOLUME={extruder_rotation_volume[0]} MIXING_STEPPER_ROTATION_VOLUME={mixing_stepper_rotation_volume[0]} PURGE_LAYER_HEIGHT=2 PURGE_PARKING_SPEED=10000 PURGE_LENGHT=500 PURGE_SPEED=500 PURGE_MATERIAL_QUANTITY=10000 EXTRUDER_TEMPERATURE=[nozzle_temperature] EXTRUDER_TEMPERATURE_INITIAL_LAYER=[nozzle_temperature_initial_layer] PRESSURE_ADVANCE=0.2 PRESSURE_ADVANCE_SMOOTH_TIME=0.5 ZONE_1_TEMPERATURE={multi_zone_1_initial_layer[0]} ZONE_2_TEMPERATURE={multi_zone_2_initial_layer[0]} ZONE_3_TEMPERATURE={multi_zone_3_initial_layer[0]}",
    "print_host": "G1OS.local",
    "printer_model": "Ginger G1",
    "retract_before_wipe": [
        "0%"
    ],
    "retract_restart_extra": [
        "35"
    ],
    "retraction_length": [
        "20"
    ],
    "retraction_minimum_travel": [
        "10"
    ],
    "retraction_speed": [
        "200"
    ],
    "support_air_filtration": "0",
    "support_chamber_temp_control": "0",
    "wipe_distance": [
        "10"
    ],
    "z_hop": [
        "1.5"
    ],
    "z_hop_types": [
        "Normal Lift"
    ],
    "pellet_modded_printer": "1",
    "use_extruder_rotation_volume": "1",
    "use_active_pellet_feeding": "1",
    "multi_zone": "1",
    "multi_zone_number": "3",
    "active_feeder_motor_name": [
        "mixing_stepper"
    ]
}