{
  "type": "filament",
  "name": "fdm_filament_common",
  "from": "system",
  "instantiation": "false",
  "cool_plate_temp": [
    "60"
  ],
  "eng_plate_temp": [
    "60"
  ],
  "hot_plate_temp": [
    "60"
  ],
  "textured_plate_temp": [
    "60"
  ],
  "cool_plate_temp_initial_layer": [
    "60"
  ],
  "eng_plate_temp_initial_layer": [
    "60"
  ],
  "hot_plate_temp_initial_layer": [
    "60"
  ],
  "textured_plate_temp_initial_layer": [
    "60"
  ],
  "overhang_fan_threshold": [
    "95%"
  ],
  "overhang_fan_speed": [
    "100"
  ],
  "slow_down_for_layer_cooling": [
    "1"
  ],
  "close_fan_the_first_x_layers": [
    "3"
  ],
  "filament_end_gcode": [
    "; filament end gcode \n"
  ],
  "filament_flow_ratio": [
    "1"
  ],
  "reduce_fan_stop_start_freq": [
    "0"
  ],
  "fan_cooling_layer_time": [
    "60"
  ],
  "filament_cost": [
    "0"
  ],
  "filament_density": [
    "0"
  ],
  "filament_deretraction_speed": [
    "nil"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "filament_max_volumetric_speed": [
    "0"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "filament_retract_before_wipe": [
    "nil"
  ],
  "filament_retract_when_changing_layer": [
    "nil"
  ],
  "filament_retraction_length": [
    "nil"
  ],
  "filament_z_hop": [
    "nil"
  ],
  "filament_z_hop_types": [
    "nil"
  ],
  "filament_retract_restart_extra": [
    "nil"
  ],
  "filament_retraction_speed": [
    "nil"
  ],
  "filament_settings_id": [
    ""
  ],
  "filament_soluble": [
    "0"
  ],
  "filament_type": [
    "PLA"
  ],
  "filament_vendor": [
    "Generic"
  ],
  "filament_wipe": [
    "nil"
  ],
  "filament_wipe_distance": [
    "nil"
  ],
  "bed_type": [
    "Cool Plate"
  ],
  "nozzle_temperature_initial_layer": [
    "200"
  ],
  "full_fan_speed_layer": [
    "0"
  ],
  "fan_max_speed": [
    "100"
  ],
  "fan_min_speed": [
    "35"
  ],
  "slow_down_min_speed": [
    "10"
  ],
  "slow_down_layer_time": [
    "8"
  ],
  "filament_start_gcode": [
    "; Filament gcode\n"
  ],
  "nozzle_temperature": [
    "200"
  ],
  "temperature_vitrification": [
    "100"
  ]
}