{
    "type": "process",
    "name": "0.20mm SPEED @MK4S 0.5",
    "inherits": "process_common_mk4s",
    "from": "system",
    "instantiation": "true",
    "bridge_acceleration": "1000",
    "bridge_speed": "40",
    "compatible_printers_condition": "printer_notes=~/.*MK4S.*/ and nozzle_diameter[0]==0.5 and printer_notes!~/.*HF_NOZZLE.*/",
    "default_acceleration": "2500",
    "gap_infill_speed": "70",
    "infill_anchor_max": "15",
    "initial_layer_line_width": "0.55",
    "inner_wall_acceleration": "3500",
    "inner_wall_line_width": "0.55",
    "inner_wall_speed": "140",
    "internal_solid_infill_acceleration": "3000",
    "internal_solid_infill_line_width": "0.55",
    "internal_solid_infill_speed": "135",
    "layer_height": "0.20",
    "line_width": "0.55",
    "outer_wall_acceleration": "2500",
    "outer_wall_line_width": "0.55",
    "outer_wall_speed": "140",
    "raft_contact_distance": "0.25",
    "small_perimeter_speed": "140",
    "sparse_infill_line_width": "0.55",
    "support_interface_spacing": "0.22",
    "support_line_width": "0.4",
    "support_object_xy_distance": "0.44",
    "top_surface_acceleration": "1000",
    "top_surface_line_width": "0.5",
    "top_surface_speed": "70"
}