{
    "type": "process",
    "name": "0.55mm Draft @MK3S 0.8",
    "inherits": "process_common_mk3",
    "from": "system",
    "instantiation": "true",
    "print_settings_id": "0.55mm Draft @MK3S 0.8",
    "bottom_shell_layers": "3",
    "bridge_acceleration": "1000",
    "bridge_speed": "25",
    "inner_wall_acceleration": "800",
    "raft_contact_distance": "0.2",
    "sparse_infill_acceleration": "1000",
    "sparse_infill_pattern": "crosshatch",
    "support_base_pattern_spacing": "2",
    "support_bottom_z_distance": "0.2",
    "support_interface_speed": "36",
    "support_object_xy_distance": "0.36",
    "support_top_z_distance": "0.2",
    "thick_bridges": "0",
    "top_shell_layers": "4",
    "bottom_shell_thickness": "0.8",
    "bridge_flow": "0.9",
    "elefant_foot_compensation": "0.2",
    "gap_infill_speed": "30",
    "initial_layer_line_width": "0.9",
    "initial_layer_print_height": "0.3",
    "inner_wall_line_width": "1",
    "inner_wall_speed": "30",
    "internal_solid_infill_line_width": "0.9",
    "internal_solid_infill_speed": "50",
    "layer_height": "0.55",
    "line_width": "0.9",
    "outer_wall_line_width": "1",
    "outer_wall_speed": "25",
    "small_perimeter_speed": "25",
    "sparse_infill_line_width": "0.9",
    "sparse_infill_speed": "50",
    "support_line_width": "0.7",
    "support_speed": "35",
    "top_shell_thickness": "1.2",
    "top_surface_line_width": "0.8",
    "top_surface_speed": "30",
    "wall_loops": "2",
    "compatible_printers": [
        "Prusa MK3S 0.8 nozzle"
    ]
}