{
    "type": "filament",
    "filament_id": "QD_0_1_46",
    "setting_id": "GFSN99",
    "name": "QIDI PPS-GF",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_filament_pa",
    "box_temperature_range_high": ["65"],
    "box_temperature_range_low": ["0"],
    "box_temperature": ["65"],
    "chamber_temperature": ["0"],
    "close_fan_the_first_x_layers": ["3"],
    "during_print_exhaust_fan_speed": ["0"],
    "fan_cooling_layer_time": ["30"],
    "fan_max_speed": ["90"],
    "fan_min_speed": ["10"],
    "filament_adhesiveness_category": ["801"],
    "filament_density": ["1.3"],
    "filament_flow_ratio": ["0.97"],
    "filament_max_volumetric_speed": ["12"],
    "filament_type": ["PPS-GF"],
    "impact_strength_z":["2.8"],
    "nozzle_temperature_initial_layer": ["320"],
    "nozzle_temperature_range_high": ["350"],
    "nozzle_temperature_range_low": ["300"],
    "nozzle_temperature": ["320"],
    "overhang_fan_speed": ["50"],
    "overhang_fan_threshold": ["0%"],
    "pressure_advance": ["0.032"],
    "slow_down_layer_time": ["6"],
    "temperature_vitrification": ["180"],
    "hot_plate_temp_initial_layer": ["90"],
    "hot_plate_temp": ["90"],
    "compatible_printers": [
        "Qidi X-Smart 3 0.4 nozzle",
        "Qidi X-Plus 3 0.4 nozzle",
        "Qidi X-Max 3 0.4 nozzle",
        "Qidi X-Smart 3 0.6 nozzle",
        "Qidi X-Plus 3 0.6 nozzle",
        "Qidi X-Max 3 0.6 nozzle",
        "Qidi X-Smart 3 0.8 nozzle",
        "Qidi X-Plus 3 0.8 nozzle",
        "Qidi X-Max 3 0.8 nozzle"
    ]
}