{
    "type": "filament",
    "filament_id": "QD_3_1_33",
    "setting_id": "GFSN96",
    "name": "QIDI Support For PET/PA@X-Max 4-Series",
    "from": "system",
    "instantiation": "false",
    "inherits": "fdm_filament_x4_common",
    "box_temperature_range_high": ["65"],
    "box_temperature_range_low": ["0"],
    "box_temperature": ["55"],
    "close_fan_the_first_x_layers": ["3"],
    "fan_cooling_layer_time": ["10"],
    "fan_max_speed": ["60"],
    "fan_min_speed": ["0"],
    "filament_adhesiveness_category": ["800"],
    "filament_density": ["1.16"],
    "filament_flow_ratio": ["0.91"],
    "filament_is_support": ["1"],
    "filament_max_volumetric_speed": ["8"],
    "filament_type": ["PA-S"],
    "impact_strength_z":["4.5"],
    "nozzle_temperature_initial_layer": ["280"],
    "nozzle_temperature_range_high": ["280"],
    "nozzle_temperature_range_low": ["260"],
    "nozzle_temperature": ["280"],
    "overhang_fan_speed": ["30"],
    "overhang_fan_threshold": ["95%"],
    "pressure_advance": ["0.02"],
    "slow_down_layer_time": ["6"],
    "temperature_vitrification": ["168"],
    "hot_plate_temp_initial_layer" : ["80"],
    "hot_plate_temp" : ["80"],
    "supertack_plate_temp_initial_layer": ["80"],
    "supertack_plate_temp": ["80"],
    "compatible_printers": []
}