{
    "type": "machine",
    "name": "Qidi X-Max 0.4 nozzle",
    "inherits": "fdm_qidi_common",
    "from": "system",
    "setting_id": "GM001",
    "instantiation": "true",
    "printer_model": "Qidi X-Max",
    "default_print_profile": "0.20mm Standard @Qidi XMax",
    "nozzle_diameter": [
        "0.4"
    ],
    "printable_area": [
        "0x0",
        "300x0",
        "300x250",
        "0x250"
    ],
    "printable_height": "300",
    "nozzle_type": "hardened_steel",
    "auxiliary_fan": "0",
    "machine_max_acceleration_extruding": [
        "1500",
        "1250"
    ],
    "machine_max_acceleration_retracting": [
        "1500",
        "1250"
    ],
    "machine_max_acceleration_travel": [
        "1500",
        "1250"
    ],
    "machine_max_acceleration_x": [
        "9000",
        "1000"
    ],
    "machine_max_acceleration_y": [
        "9000",
        "1000"
    ],
    "machine_max_acceleration_z": [
        "500",
        "200"
    ],
    "machine_max_speed_e": [
        "120",
        "120"
    ],
    "machine_max_speed_x": [
        "500",
        "200"
    ],
    "machine_max_speed_y": [
        "500",
        "200"
    ],
    "machine_max_speed_z": [
        "12",
        "12"
    ],
    "machine_max_jerk_e": [
        "2.5",
        "2.5"
    ],
    "machine_max_jerk_x": [
        "10",
        "10"
    ],
    "machine_max_jerk_y": [
        "10",
        "10"
    ],
    "machine_max_jerk_z": [
        "0.2",
        "0.4"
    ],
    "max_layer_height": [
        "0.32"
    ],
    "min_layer_height": [
        "0.07"
    ],
    "printer_settings_id": "Qidi",
    "retraction_minimum_travel": [
        "2"
    ],
    "retraction_length": [
        "2"
    ],
    "retract_length_toolchange": [
        "2"
    ],
    "deretraction_speed": [
        "0"
    ],
    "single_extruder_multi_material": "0",
    "change_filament_gcode": "",
    "machine_pause_gcode": "M0",
    "default_filament_profile": [
        "Qidi Generic PLA"
    ],
    "machine_start_gcode": "G28\nG92 E0\nG0 X300 Y5 Z50 F3600\nM190 S[bed_temperature_initial_layer_single]\nM109 S[first_layer_temperature]\nG92 E-19\n",
    "machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E0\nG1 E-3 F300\nG28\nM84\n",
    "scan_first_layer": "0"
}