{
    "type": "machine",
    "name": "fdm_machine_x_common",
    "inherits": "fdm_qidi_x3_common",
    "from": "system",
    "instantiation": "false",
    "printer_technology": "FFF",
    "auxiliary_fan": "1",
    "auto_disable_filter_on_overheat": "0",
    "before_layer_change_gcode": "",
    "change_filament_gcode": "",
    "cooling_filter_enabled": "0",
    "default_print_profile": "0.20mm Standard @XPlus4",
    "deretraction_speed": ["30"],
    "extruder_clearance_height_to_lid": "140",
    "extruder_clearance_height_to_rod": "36",
    "extruder_clearance_radius": "65",
    "extruder_colour": ["#FCE94F"],
    "extruder_max_nozzle_count": ["1"],
    "extruder_offset": ["0x0"],
    "gcode_flavor": "klipper",
    "group_algo_with_time": "0",
    "layer_change_gcode": "G92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
    "machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nG0 Y290 F12000\nG0 X90 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
    "machine_hotend_change_time": "0",
    "machine_load_filament_time": "35",
    "machine_max_acceleration_e": ["5000"],
    "machine_max_acceleration_extruding": ["20000", "20000"],
    "machine_max_acceleration_retracting": ["5000", "5000"],
    "machine_max_acceleration_travel": ["9000", "9000"],
    "machine_max_acceleration_x": ["20000"],
    "machine_max_acceleration_y": ["20000"],
    "machine_max_acceleration_z": ["500"],
    "machine_max_jerk_e": ["4"],
    "machine_max_jerk_x": ["9"],
    "machine_max_jerk_y": ["9"],
    "machine_max_jerk_z": ["4"],
    "machine_max_speed_e": ["30"],
    "machine_max_speed_x": ["600"],
    "machine_max_speed_y": ["600"],
    "machine_max_speed_z": ["20"],
    "machine_min_extruding_rate": ["0", "0"],
    "machine_min_travel_rate": ["0", "0"],
    "machine_pause_gcode": "M0",
    "machine_start_gcode": "PRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperatures]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nT[initial_tool]\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperatures]\nG4 P3000\nG0 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0] - 12, first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\nSET_PRINT_STATS_INFO CURRENT_LAYER=1",
    "machine_switch_extruder_time": "0",
    "machine_unload_filament_time": "35",
    "max_layer_height": ["0.28"],
    "min_layer_height": ["0.08"],
    "nozzle_diameter": ["0.4"],
    "nozzle_type": ["hardened_steel"],
    "printable_height": "280",
    "printer_settings_id": "",
    "printer_structure": "corexy",
    "printer_variant": "0.4",
    "retract_before_wipe": ["0%"],
    "retract_length_toolchange": ["2"],
    "retract_restart_extra_toolchange": ["0"],
    "retract_restart_extra": ["0"],
    "retract_when_changing_layer": ["1"],
    "retraction_length": ["0.8"],
    "retraction_minimum_travel": ["1"],
    "retraction_speed": ["30"],
    "scan_first_layer": "0",
    "silent_mode": "0",
    "single_extruder_multi_material": "1",
    "wipe_tower_type": "type1",
    "support_air_filtration": ["1"],
    "support_box_temp_control": "1",
    "support_chamber_temp_control": "1",
    "support_cooling_filter": "0",
    "thumbnail_size": ["272x272/PNG","96x96/PNG"],
    "wipe": ["1"],
    "z_hop_types": ["Auto Lift"],
    "z_hop": ["0.4"]
}