{
    "type": "process",
    "setting_id": "GP009",
    "name": "0.40mm Standard @X-Max 4 0.8 nozzle",
    "from": "system",
    "instantiation": "true",
    "inherits": "fdm_process_n_common",
    "bridge_flow": "1",
    "bridge_speed": ["30"],
    "default_acceleration": ["10000"],
    "elefant_foot_compensation": "0.15",
    "enable_arc_fitting": "0",
    "gap_infill_speed": ["50"],
    "initial_layer_infill_speed": ["55"],
    "initial_layer_line_width": "0.82",
    "initial_layer_print_height": "0.4",
    "initial_layer_speed": ["35"],
    "inner_wall_acceleration": ["5000"],
    "inner_wall_line_width": "0.82",
    "inner_wall_speed": ["150"],
    "internal_solid_infill_line_width": "0.82",
    "internal_solid_infill_speed": ["150"],
    "layer_height": "0.4",
    "line_width": "0.82",
    "outer_wall_acceleration": ["3000"],
    "outer_wall_line_width": "0.82",
    "outer_wall_speed": ["120"],
    "overhang_3_4_speed": ["25"],
    "overhang_4_4_speed": ["5"],
    "skin_infill_line_width": "0.82",
    "skeleton_infill_line_width": "0.82",
    "small_perimeter_threshold": ["4"],
    "smooth_coefficient": "4",
    "sparse_infill_line_width": "0.82",
    "sparse_infill_speed": ["100"],
    "support_line_width": "0.82",
    "top_surface_line_width": "0.82",
    "top_surface_pattern": "monotonic",
    "top_surface_speed": ["150"],
    "travel_speed": ["500"],
    "compatible_printers": ["Qidi X-Max 4 0.8 nozzle"]
}