{
    "type": "machine",
    "name": "RatRig V-Core 4 500 0.4 nozzle",
    "inherits": "fdm_klipper_common",
    "from": "system",
    "setting_id": "GM002",
    "instantiation": "true",
    "printer_model": "RatRig V-Core 4 500",
    "printer_variant": "0.4",
    "nozzle_diameter": [
        "0.4"
    ],
    "printable_area": [
        "0x0",
        "500x0",
        "500x500",
        "0x500"
    ],
    "machine_max_speed_x": [
        "400",
        "400"
    ],
    "machine_max_speed_y": [
        "400",
        "400"
    ],
    "machine_max_speed_z": [
        "200",
        "200"
    ],
    "machine_max_speed_e": [
        "120",
        "120"
    ],
    "machine_max_acceleration_x": [
        "10000",
        "10000"
    ],
    "machine_max_acceleration_y": [
        "10000",
        "10000"
    ],
    "machine_max_acceleration_z": [
        "200",
        "200"
    ],
    "machine_max_acceleration_e": [
        "5000",
        "5000"
    ],
    "machine_max_acceleration_extruding": [
        "10000",
        "10000"
    ],
    "machine_max_acceleration_retracting": [
        "10000",
        "10000"
    ],
    "machine_max_acceleration_travel": [
        "10000",
        "10000"
    ],
    "machine_max_jerk_x": [
        "5",
        "5"
    ],
    "machine_max_jerk_y": [
        "5",
        "5"
    ],
    "machine_max_jerk_z": [
        "0.4",
        "0.4"
    ],
    "machine_max_jerk_e": [
        "5",
        "5"
    ],
    "min_layer_height": [
        "0.06"
    ],
    "max_layer_height": [
        "0.3"
    ],
    "extruder_clearance_radius": "45",
    "extruder_clearance_height_to_rod": "25",
    "extruder_clearance_height_to_lid": "140",
    "retract_lift_below": [
        "0.2"
    ],
    "retraction_length": [
        "0.8"
    ],
    "retraction_speed": [
        "120"
    ],
    "deretraction_speed": [
        "120"
    ],
    "wipe": [
        "1"
    ],
    "retract_before_wipe": [
        "70%"
    ],
    "z_hop": [
        "0.2"
    ],
    "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
    "change_filament_gcode": "M600",
    "machine_pause_gcode": "PAUSE",
    "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0",
    "printable_height": "500",
    "thumbnails": [
        "64x64/PNG",
        "400x300/PNG"
    ]
}