{
    "type": "process",
    "name": "0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle)",
    "inherits": "fdm_process_U1_0.20",
    "from": "system",
    "setting_id": "GP008",
    "instantiation": "true",
    "enable_support": "1",
    "support_interface_top_layers": "3",
    "support_top_z_distance": "0.2",
    "support_interface_loop_pattern": "1",
    "support_interface_spacing": "0",
    "support_interface_speed": "80",
    "support_filament": "0",
    "support_interface_filament": "0",
    "enable_prime_tower": "1",
    "compatible_printers": [
        "Snapmaker U1 (0.4 nozzle)"
    ],
    "ooze_prevention": "1",
    "slowdown_for_curled_perimeters": "0",
    "standby_temperature_delta": "-150",
    "wipe_tower_filament": "1"
}