{
    "type": "process",
    "name": "0.20 Support @Snapmaker U1 (0.4 nozzle)",
    "inherits": "fdm_process_U1_0.20",
    "from": "system",
    "setting_id": "GP0040",
    "instantiation": "true",
    "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
    "smooth_coefficient": "150",
    "overhang_totally_speed": "50",
    "compatible_printers": [
        "Snapmaker U1 (0.4 nozzle)"
    ],
    "ooze_prevention": "1",
    "slowdown_for_curled_perimeters": "0",
    "standby_temperature_delta": "-150",
    "wipe_tower_filament": "0",
    "preheat_time": "30",
    "wipe_tower_cone_angle": "15",
    "prime_tower_brim_width": "5",
    "enable_support": "1",
    "initial_layer_print_height": "0.25",
    "support_interface_spacing": "0",
    "support_interface_top_layers": "3"
}