{
    "type": "process",
    "name": "0.40 Extra Draft @Snapmaker U1 (0.6 nozzle)",
    "inherits": "fdm_process_U1_0.6_common",
    "from": "system",
    "setting_id": "GP004_06_040",
    "instantiation": "true",
    "description": "Maximum-speed profile for the Snapmaker U1 with 0.6 mm nozzles. 0.4 mm layer height for rapid prototyping where surface finish is not critical.",
    "layer_height": "0.40",
    "smooth_coefficient": "80",
    "overhang_totally_speed": "30",
    "compatible_printers": [
        "Snapmaker U1 (0.6 nozzle)"
    ],
    "ooze_prevention": "1",
    "slowdown_for_curled_perimeters": "0",
    "standby_temperature_delta": "-150",
    "wipe_tower_filament": "0",
    "preheat_time": "30",
    "wipe_tower_cone_angle": "15",
    "prime_tower_brim_width": "5",
    "initial_layer_print_height": "0.35",
    "top_shell_layers": "3",
    "bottom_shell_layers": "3",
    "outer_wall_speed": "220",
    "inner_wall_speed": "330",
    "sparse_infill_speed": "320",
    "internal_solid_infill_speed": "300",
    "wall_loops": "2"
}