{
    "type": "filament",
    "filament_id": "GFL99",
    "setting_id": "GFSA04",
    "name": "Polymaker PETG @Sovol SV08 MAX",
    "from": "system",
    "instantiation": "true",
    "inherits": "Generic PETG @System",
    "filament_flow_ratio": ["0.98"],
    "filament_max_volumetric_speed": [
        "12"
    ],
    "enable_pressure_advance": "1",
    "pressure_advance": "0.08",
    "nozzle_temperature_initial_layer": [
        "275"
    ],
    "nozzle_temperature": [
        "270"
    ],
    "nozzle_temperature_range_low": [
        "230"
    ],
    "nozzle_temperature_range_high": [
        "280"
    ],
    "hot_plate_temp": [
        "80"
    ],
    "hot_plate_temp_initial_layer": [
        "80"
    ],
    "fan_min_speed": [
        "10"
    ],
    "fan_max_speed": [
        "40"
    ],
    "fan_cooling_layer_time": [
        "30"
    ],
    "full_fan_speed_layer": [
        "3"
    ],
    "slow_down_layer_time": [
        "12"
    ],
    "slow_down_min_speed": [
        "10"
    ],
    "overhang_fan_speed": [
        "100"
    ],
    "overhang_fan_threshold": [
        "10%"
    ],
    "temperature_vitrification": [
        "60"
    ],
    "close_fan_the_first_x_layers": [
        "1"
    ],
    "filament_retraction_length": [
        "0.5"
    ],
    "filament_z_hop": [
        "0.4"
    ],
    "dont_slow_down_outer_wall": "1",
    "activate_air_filtration": ["0"],
    "during_print_exhaust_fan_speed": "50",
    "complete_print_exhaust_fan_speed": "50",
    "compatible_printers": [
        "Sovol SV08 MAX 0.4 nozzle",
        "Sovol SV08 MAX 0.6 nozzle",
        "Sovol SV08 MAX 0.8 nozzle"
    ]
}