{
    "type": "process",
    "name": "0.20mm Strength @Z-Bolt S400",
    "inherits": "fdm_process_zbolt_0.20",
    "from": "system",
    "setting_id": "GP112",
    "instantiation": "true",
    "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
    "outer_wall_speed": "60",
    "sparse_infill_density": "25%",
    "smooth_coefficient": "150",
    "overhang_totally_speed": "50",
    "wall_loops": "6",
    "compatible_printers": [
        "Z-Bolt S400 0.4 nozzle",
        "Z-Bolt S400 Dual 0.4 nozzle"
    ]
}