{
    "type": "filament",
    "name": "fdm_filament_pet",
    "from": "system",
    "instantiation": "false",
    "inherits": "fdm_filament_common",
    "filament_density":[
        "1.27"
    ],
    "filament_cost":[
        "0"
    ],
    "temperature_vitrification":[
        "70"
    ],
    "close_fan_the_first_x_layers": [
        "3"
    ],
    "enable_overhang_bridge_fan": [
        "1"
    ],
    "fan_cooling_layer_time": [
        "30"
    ],
    "fan_max_speed": [
        "100"
    ],
    "fan_min_speed": [
        "80"
    ],
    "filament_diameter": [
        "2.85"
    ],
    "filament_flow_ratio": [
        "0.91"
    ],
    "filament_max_volumetric_speed": [
        "9.5"
    ],
    "filament_minimal_purge_on_wipe_tower": [
        "15"
    ],
    "filament_type": [
        "PETG"
    ],
    "hot_plate_temp": [
        "70"
    ],
    "hot_plate_temp_initial_layer": [
        "70"
    ],
    "nozzle_temperature": [
        "250"
    ],
    "nozzle_temperature_initial_layer": [
        "250"
    ],
    "nozzle_temperature_range_low": [
        "230"
    ],
    "nozzle_temperature_range_high":[
        "250"
    ],
    "overhang_fan_threshold": [
        "95%"
    ],
    "pressure_advance": [
        "0.205"
    ],
    "reduce_fan_stop_start_freq": [
        "1"
    ],
    "slow_down_layer_time": [
        "8"
    ],
    "slow_down_min_speed": [
        "10"
    ],
    "support_material_interface_fan_speed": [
        "100"
    ]
}