{
    "type": "process",
    "setting_id": "GP004",
    "name": "0.2mm Standard @re3D fdm 0.8",
    "from": "system",
    "inherits": "fdm_process_re3D_common",
    "instantiation": "true",
	  "compatible_printers": [
	    "re3D Gigabot 4 0.8 nozzle",
      "re3D Gigabot 4 XLT 0.8 nozzle",
      "re3D Terabot 4 0.8 nozzle"
    ],

    "layer_height": "0.2",
    "initial_layer_print_height": "0.4",

    "top_shell_layers": "4",
    "top_shell_thickness": "0.6",
    "bottom_shell_layers": "3",

    "line_width": "0.8",
    "outer_wall_line_width": "0.8",
    "inner_wall_line_width": "0.8",
    "initial_layer_line_width": "0.8",
    "sparse_infill_line_width": "0.8",
    "internal_solid_infill_line_width": "0.8",
    "top_surface_line_width": "0.8",
    "support_line_width": "0.8",


    "overhang_1_4_speed": "45",
    "overhang_2_4_speed": "35",
    "overhang_3_4_speed": "25",
    "overhang_4_4_speed": "15",

    "initial_layer_speed": "30",
    "initial_layer_infill_speed": "30",
    "initial_layer_travel_speed": "50",


    "outer_wall_speed": "45",
    "inner_wall_speed": "45",
    "small_perimeter_speed": "45",
    "small_perimeter_threshold": "45",
    "sparse_infill_speed": "45",
    "internal_solid_infill_speed": "45",
    "top_surface_speed": "45",
    "gap_infill_speed": "45",
    "support_speed": "45",
    "support_interface_speed": "45",


    "travel_speed": "300",


    "standby_temperature_delta": "-55",

    "support_top_z_distance": "0.24",
    "support_bottom_z_distance": "0.24"


}